Cosworth

The Pi Omega D2 is a high performance LCD digital dash with on-board data logger that replaces the normal set of analogue instruments in a race car.

The dash can be configured to display channel values from on-vehicle sensors connected directly to the dash or to display channel values received via CAN or Serial (RS232) from a supported Engine Control Unit (ECU).

Key Features

• Pit and Race pages: Pit pages display temperatures and pressures during warm-up, race pages show speed, rpm and lap-time. Specify when to change between the two yourself.
• Dual colour backlight: backlight turns red to ensure that alarms are visible to the driver and are never missed!
• Message centre: display "sensible" and clear alarm messages to to the driver, i.e. "Low Oil Pressure".
• Automatic gear learning: learn, store and display gear number calculated from RPM and speed¹.
• Club Qualifying Mode (CQM): live display of performance against best lap time.
• Post run "tell-tales": lap by lap review on screen including fastest lap (by default) and 'alarm on lap' indicators.
• Selectable logging rates: Data logging at sample rates of up to 200Hz - choose from low (for endurance event), medium (i.e. race) or high (i.e. qualifying or testing)
• GPS: Support for GPS speed and GPS beacons.
• Video: Support for the Pi Video Overlay Unit and Pi Interport (ODBII).
• Comms: 2x CAN, 2x RS232 and 1x Ethernet communication ports.

Three variants of the Omega D2 are available; GPS, Basic and Advanced.

Omega D2 GPS

GPS functionality only. All analogue inputs are disabled with speed and beacon from GPS and RPM pick-up via HT connection or RPM box.

Omega D2 Basic

Receives data from direct analogue inputs and Serial (RS232) or CAN streams. Standard analogue inputs are oil temperature, oil pressure, coolant temperature, fuel pressure, throttle and steering. Digital inputs for RPM, infra-red lap beacon and 1 x wheel speed. GPS is received via serial. Analogue inputs in the expansion connector are disabled, i.e. no dampers or brake pressures.

Omega D2 Advanced

In addition to the funtionality of the D2 Basic, the D2 Advanced makes use of the analogue expansion connector and provides additional analogue inputs for 2 x brake pressures, 2 x thermocouples and 4 x damper potentiometers (14 analogue inputs in total) and a further digital input for wheel speed (2 x wheel speeds in total).

Contact a representative if you are interested in purchasing this product.

• > Request more information
• > Call Us on +44 (0)1954 253600